Articles, Blog

How to Build Toolbox for Art Supplies : Tools Needed for Art Supplies Toolbox

How to Build Toolbox for Art Supplies : Tools Needed for Art Supplies Toolbox


Hi, this is John and in this clip I’ll be
talking about the tools needed to complete our project. First we’re going to need a pencil
and tape measure to help us do all the measuring and marking and designing and drawing up our
projects. To cut out the end pieces, we use a radial arm saw to size up the length, a
table saw to cut the width and a band saw to cut our angles. For our long sides, the
bottom, and the handle we use the radial arm saw to cut the length and the table saw to
cut the width. To assemble all of our pieces together, we need a drill with a few different
sizes of drill bits, depending on if you want to counter-sink your screws or not. And in
addition, we need a screwdriver bit for our drill. For the handle notch we used a drill
and a band saw to finish cutting it out. And for our dividers we used the same procedure
of using a drill to drill a hole, and a band saw to finish cutting it out. And lastly we
finished up our project by sanding it with a few different grits of sand paper.

Tagged , , , , , , , , , , ,

3 thoughts on “How to Build Toolbox for Art Supplies : Tools Needed for Art Supplies Toolbox

Leave a Reply

Your email address will not be published. Required fields are marked *